世界工厂网首页
一键发布产品

英国furness-controls

更新时间: 2020-03-28
信息编号: CNS2622439540
  • 工厂价格 ¥0.00 - ¥0.00
  • 品牌
  • 发货地 上海 上海市
  • 销售区域: 上海 上海市
  • 联系人 王昊强
  • 联系电话 15093093262
产品详情 详细属性

上海铂鳞贸易有限公司
联系人:王昊強

: 
传真:
QQ:2851033715 
邮箱:whq@berling.com.cnProducts > Pressure manometers

Differential Pressure Manometers

Furness Controls manufacture a range of Portable Micromanometers for the measurement of differential pressure, or velocity/flow measurement. Some of these instruments are capable of compensating for pressure and temperature variation, as well as storing the readings prior to download.

FCO510

 

  • Measures flow and differential pressure down to 0.001 Pa.
  • Has square root function for direct readout of flow or velocity.
  • Will compensate for temperature and absolute pressure variations.
  • Datalogging facility with RS232C output.
  • Display can show peak, valley and trends.

 

FCO520

 

  • Hand held, microprocessor based micromanometer
  • Three models measuring between 0.1 Pa to 20 kPa
  • Will compensate for temperature and absolute pressure variation
  • Datalogging facility with RS232C output
  • Has square root function for direct readout of flow or velocity.

 

FCO10

 

  • Pocket manometer with up to 80 hours battery life
  • User selectable engineering units on large LCD display
  • Ranges from 0.1 Pa to 10 kPa
  • Easy conversion from pressure to velocity
  • The practical alternative to tube manometers.

 

FCO502

 

  • Stable pressure generation from 0.5% to ****
  • Live pressure source, eliminates pressure creeping caused by temperature changes
  • Small and light weight for easy transport
  • Quiet operation
Products > Pressure Transmitters Differential Pressure Transmitters

Furness Controls manufacture a range of pressure transmitters to suit most low pressure applications from dirty environments, power generation, steel, cement, brick, glass etc., to ultra clean environments for medical, pharmaceutical, nuclear and semi-conductor application. These can be wall mounted, pipe mounted, panel mounted and ATEX approved.

FCO332

 

  • Accuracy < 0.5% of reading
  • 2, 3 or 4 wire configuration
  • Square root option
  • Relay options
  • Processor based

 

FCO352

 

  • Accuracy < 0.25% of reading
  • IP66 enclosure
  • Integral key pad for configuration
  • Square root enabled for flow/velocity measurement
  • Security PIN access code

 

FCO354

 

  • ATEX certified ultra low pressure transmitter
  • Accuracy < 0.5% of reading
  • Two wire system with current output
  • Square root enabled for flow / velocity measurement
  • IP65 enclosure

 

FCO342

 

  • Flush mounted design for clean room applications
  • Accuracy < 0.5% of reading
  • Two wire system with current output
  • Stainless steel housing to IP64
  • PC configurable for range, display and calibration

 

FCO318

 

  • Panel mounting with back lit display
  • Accuracy < 0.25% of reading
  • Configurable from front panel
  • Optional IP65 front cover
  • Adjustable relays with built-in lamps
Products > Low Differential Pressure Calibration and Flow Calibration Pressure and Leak Calibrators

Furness Controls manufacture low differential pressure calibrators and gas flow calibrators.

Our UKAS accredited calibration laboratories in England, France and Germany can provide:

  • Low pressure calibration
  • Differential pressure calibration
  • Low flow calibration
  • High flow calibration
  • Vacuum Calibration

FCO210

 

  • Variable flow rates
  • Easy to use
  • Clear display
  • Shut-off valve

 

FCO550

 

  • Low pressure Calibrator / Controller
  • Accuracy < 0.1% of reading
  • Pressure generation 0.5 Pa to 20 kPa.
  • High contrast colour TFT display.
  • Dual range (1:20,000 resolution per range)
  • SCPI communications via GPIB or RS232

 

FCO99

 

  • Very easy to use
  • Wide range of pressures / flows available
  • No moving parts
  • Small internal volume

 

PPC500

 

  • Portable low pressure calibrator
  • Incorporates pressure generation
  • Datalogging facility with RS232C output
  • Dual ranged providing 1:20,000 resolution
  • Accuracy of better than 0.1% of Reading

 

FRS4/FRS5

 

  • Unique primary pressure and vacuum standard
  • Pressure calibration range from 0.001 Pa to 40 kPa (FRS4)
  • The FRS5 draws vacuum from 1 x 10-3 Pa.
  • Vacuum calibration from 0-1 kPa upwards
  • Used worldwide in national & accredited laboratories.
Flow measurement equipment

By combining Furness Controls' Laminar Flow Elements with the ability to measure low differential pressures, accurate measurement of flows from as low as 0.01cc/m to over 20,000 l/m can be achieved with very low insertion loss.

 

FCO732

 

  • Excellent accuracy of <±1% Reading
  • Clear blue back-lit display
  • Pressure control
  • Air and gas flows from 0.01 ml/min to 10,000 l/min

 

FCO752

 

  • Air and gas flows from 0.01 ml/min to 10,000 l/min
  • Automatic pressure & temperature compensation
  • Single test or multiple test variants available
  • Automatic pressure regulation variant available
  • Partial blockage identification and cross sectional area testing

 

FCO510

 

  • Multiple flow element selection.
  • Volumetric and Mass flow displays.
  • Separate linearity tables for each Flow Element.
  • Flow corrected for pressure and temperature.
  • Display can show Peak, Valley and graph of Trends.
  • High accuracy for Laboratory use.
Leak detection equipment

Solving your leak detection problems. Components and assemblies ranging from Automotive Radiators, Gas Appliances, Valves, Medical Devices and Vacuum Cleaners must be tested as "fit for purpose" during manufacture - Furness Controls can provide the right test solution for leakage, flow rate, blockage etc.

Our expertise is available to bring the right solution to the measuring problem. Everything from tooling, automation, fixturing and data collection can be provided. We work with many different companies to bring the solution to you.

FCO770

 

  • Customisable Graphical screen prompts
  • Touch screen interface
  • Dual and automatic pressure regulation options
  • Leak sensitivity down to 0.1 Pa or 0.01 ml/min
  • Programmable electrical and pneumatic outputs

 

 

FCO754

 

  • Continuous reading leak detector
  • Instant response to leak correction
  • Ideal for large temperature sensitive items

 

FCO750

 

  • Suitable for simple and complex test sequences
  • Dual and automatic pressure regulation options
  • Leak sensitivity down to 0.1 Pa or 0.01 ml/min
  • Programmable electrical and pneumatic outputs
  • Graphical display of test progress

 

 

FCO730

 

  • Entry level Leak Detector
  • Suitable for simple single test leak detection applications
  • Test pressures from vacuum up to 30 bar
  • Leak sensitivity down to 0.1 Pa or 0.01 ml/min
  • Programmable electrical and pneumatic outputs

 

FCO210

 

  • Easy to use calibrator
  • Variable flow rates
  • Clear display
  • Shut-off valve


Products > Flow Elements

Flow Elements

Furness Controls manufacture a range of pitot tubes and laminar flow elements for a variety of applications. The pitot tubes comform to the classic Prandtl design, or averaging types for industrial applications. The laminar flow elements offer extremely good turn-down as there is no requirement for square root calculations.

FCO65

 

  • Classic Prandtl design for most duct sizes.
  • Stainless steel construction
  • Suitable for temperatures up to 500 °C.
  • Optional thermocouple for temperature correction
  • Versions for installation or hand-held use

 

FCO68

 

  • Averaging design for increased accuracy
  • Sturdy, stainless steel construction
  • Available with welded flange or stuffing box and locking gland
  • Custom built to fit your pipe or duct
  • Various diameters available from ¼ inch to 1 inch.

 

FCO96

 

  • Primary flow element for air/gas flows 0.1 ml/min to 10,000 l/min
  • Excellent turn-down properties
  • No square root extraction required
  • Generate very low pressure drop across the element
  • Suitable for pressures up to 8 bar gauge

  • 品牌: BROAD/远大
  • 型号: 英国furness-controls
  • 材质: 不锈钢
  • 加工定制:
  • 类型: 滚子链
  • 节距: 短节距p
  • 级数: 单级
  • 适用范围: 通用

供应商本人已收到,会尽快联系您!

留言板

咨询主题
*咨询详情
*联系人
*手机号码
QQ号

验证码

大家都在看

上海铂鳞贸易有限公司
  • 上海 上海市
  • 企业类型: 有限责任公司
  • 经营模式: 服务型
  • 主营: 欧美各国的泵阀 编码器 传感器 开关 过滤器、滤芯 仪器仪表等。
相关产品信息